如何:将访问控制列表配置应用于服务调用

Restrict what operations calling applications can perform, via service invocation, on the called application

Access control enables the configuration of policies that restrict what operations calling applications can perform, via service invocation, on the called application. To limit access to a called applications from specific operations and HTTP verbs from the calling applications, you can define an access control policy specification in configuration.

An access control policy is specified in configuration and be applied to Dapr sidecar for the called application. Example access policies are shown below and access to the called app is based on the matched policy action. You can provide a default global action for all calling applications and if no access control policy is specified, the default behavior is to allow all calling applicatons to access to the called app.

Watch this video on how to apply access control list for service invocation.

基础概念

TrustDomain - A “trust domain” is a logical group to manage trust relationships. Every application is assigned a trust domain which can be specified in the access control list policy spec. If no policy spec is defined or an empty trust domain is specified, then a default value “public” is used. This trust domain is used to generate the identity of the application in the TLS cert.

App Identity - Dapr requests the sentry service to generate a SPIFFE id for all applications and this id is attached in the TLS cert. The SPIFFE id is of the format: **spiffe://\<trustdomain>/ns/\<namespace\>/\<appid\>**. For matching policies, the trust domain, namespace and app ID values of the calling app are extracted from the SPIFFE id in the TLS cert of the calling app. These values are matched against the trust domain, namespace and app ID values specified in the policy spec. If all three of these match, then more specific policies are further matched. The SPIFFE id is of the format: **spiffe://\<trustdomain>/ns/\<namespace\>/\<appid\>**. For matching policies, the trust domain, namespace and app ID values of the calling app are extracted from the SPIFFE id in the TLS cert of the calling app. These values are matched against the trust domain, namespace and app ID values specified in the policy spec. If all three of these match, then more specific policies are further matched. The SPIFFE id is of the format: **spiffe://\<trustdomain>/ns/\<namespace\>/\<appid\>**. For matching policies, the trust domain, namespace and app ID values of the calling app are extracted from the SPIFFE id in the TLS cert of the calling app. These values are matched against the trust domain, namespace and app ID values specified in the policy spec. If all three of these match, then more specific policies are further matched.

Configuration properties

The following tables lists the different properties for access control, policies and operations:

Access Control

属性数据类型说明
defaultActionstringGlobal default action when no other policy is matched
trustDomainstringTrust domain assigned to the application. Default is “public”.
policiesstringPolicies to determine what operations the calling app can do on the called app

Policies

属性数据类型说明
appstringAppId of the calling app to allow/deny service invocation from
namespacestringNamespace value that needs to be matched with the namespace of the calling app
trustDomainstringTrust domain that needs to be matched with the trust domain of the calling app. Default is “public”
defaultActionstringApp level default action in case the app is found but no specific operation is matched
功能操作stringoperations that are allowed from the calling app

功能操作

属性数据类型说明
namestringPath name of the operations allowed on the called app. Wildcard “*” can be used to under a path to match
httpVerblistList specific http verbs that can be used by the calling app. Wildcard “*” can be used to match any http verb. Unused for grpc invocation
actionstringAccess modifier. Accepted values “allow” (default) or “deny”

Policy rules

  1. If no access policy is specified, the default behavior is to allow all apps to access to all methods on the called app
  2. If no global default action is specified and no app specific policies defined, the empty access policy is treated like no access policy specified and the default behavior is to allow all apps to access to all methods on the called app.
  3. If no global default action is specified but some app specific policies have been defined, then we resort to a more secure option of assuming the global default action to deny access to all methods on the called app.
  4. If an access policy is defined and if the incoming app credentials cannot be verified, then the global default action takes effect.
  5. If either the trust domain or namespace of the incoming app do not match the values specified in the app policy, the app policy is ignored and the global default action takes effect.

Policy priority

The action corresponding to the most specific policy matched takes effect as ordered below:

  1. Specific HTTP verbs in the case of HTTP or the operation level action in the case of GRPC.
  2. The default action at the app level
  3. The default action at the global level

Example scenarios

Below are some example scenarios for using access control list for service invocation. See configuration guidance to understand the available configuration settings for an application sidecar.

Scenario 1: Deny access to all apps except where trustDomain = public, namespace = default, appId = app1

With this configuration, all calling methods with appId = app1 are allowed and all other invocation requests from other applications are denied

apiVersion: dapr.io/v1alpha1
kind: Configuration
metadata:
  name: appconfig
spec:
  accessControl:
    defaultAction: deny
    trustDomain: "public"
    policies:
    - appId: app1
      defaultAction: allow
      trustDomain: 'public'
      namespace: "default"

Scenario 2: Deny access to all apps except trustDomain = public, namespace = default, appId = app1, operation = op1

With this configuration, only method op1 from appId = app1 is allowed and all other method requests from all other apps, including other methods on app1, are denied

apiVersion: dapr.io/v1alpha1
kind: Configuration
metadata:
  name: appconfig
spec:
  accessControl:
    defaultAction: deny
    trustDomain: "public"
    policies:
    - appId: app1
      defaultAction: deny
      trustDomain: 'public'
      namespace: "default"
      operations:
      - name: /op1
        httpVerb: ['*']
        action: allow

Scenario 3: Deny access to all apps except when a specific verb for HTTP and operation for GRPC is matched

With this configuration, the only scenarios below are allowed access and and all other method requests from all other apps, including other methods on app1 or app2, are denied

  • trustDomain = public, namespace = default, appID = app1, operation = op1, http verb = POST/PUT
  • trustDomain = “myDomain”, namespace = “ns1”, appID = app2, operation = op2 and application protocol is GRPC , only HTTP verbs POST/PUT on method op1 from appId = app1 are allowed and all other method requests from all other apps, including other methods on app1, are denied
apiVersion: dapr.io/v1alpha1
kind: Configuration
metadata:
  name: appconfig
spec:
  accessControl:
    defaultAction: deny
    trustDomain: "public"
    policies:
    - appId: app1
      defaultAction: deny
      trustDomain: 'public'
      namespace: "default"
      operations:
      - name: /op1
        httpVerb: ['POST', 'PUT']
        action: allow
    - appId: app2
      defaultAction: deny
      trustDomain: 'myDomain'
      namespace: "ns1"
      operations:
      - name: /op2
        action: allow

Scenario 4: Allow access to all methods except trustDomain = public, namespace = default, appId = app1, operation = /op1/*, all http verbs

apiVersion: dapr.io/v1alpha1
kind: Configuration
metadata:
  name: appconfig
spec:
  accessControl:
    defaultAction: allow
    trustDomain: "public"
    policies:
    - appId: app1
      defaultAction: allow
      trustDomain: 'public'
      namespace: "default"
      operations:
      - name: /op1/*
        httpVerb: ['*']
        action: deny

Scenario 5: Allow access to all methods for trustDomain = public, namespace = ns1, appId = app1 and deny access to all methods for trustDomain = public, namespace = ns2, appId = app1

This scenario shows how applications with the same app ID but belonging to different namespaces can be specified

apiVersion: dapr.io/v1alpha1
kind: Configuration
metadata:
  name: appconfig
spec:
  accessControl:
    defaultAction: allow
    trustDomain: "public"
    policies:
    - appId: app1
      defaultAction: allow
      trustDomain: 'public'
      namespace: "ns1"
    - appId: app1
      defaultAction: deny
      trustDomain: 'public'
      namespace: "ns2"

Hello world examples

These examples show how to apply access control to the hello world quickstart samples where a python app invokes a node.js app. Access control lists rely on the Dapr Sentry service to generate the TLS certificates with a SPIFFE id for authentication, which means the Sentry service either has to be running locally or deployed to your hosting enviroment such as a Kubernetes cluster.

The nodeappconfig example below shows how to deny access to the neworder method from the pythonapp, where the python app is in the myDomain trust domain and default namespace. The nodeapp is in the public trust domain.

nodeappconfig.yaml

apiVersion: dapr.io/v1alpha1
kind: Configuration
metadata:
  name: nodeappconfig
spec:
  tracing:
    samplingRate: "1"
  accessControl:
    defaultAction: allow
    trustDomain: "public"
    policies:
    - appId: pythonapp
      defaultAction: allow
      trustDomain: 'myDomain'
      namespace: "default"
      operations:
      - name: /neworder
        httpVerb: ['POST']
        action: deny

pythonappconfig.yaml

apiVersion: dapr.io/v1alpha1
kind: Configuration
metadata:
  name: pythonappconfig
spec:
  tracing:
    samplingRate: "1"
  accessControl:
    defaultAction: allow
    trustDomain: "myDomain"

自托管模式

This example uses the hello world quickstart.

The following steps run the Sentry service locally with mTLS enabled, set up necessary environment variables to access certificates, and then launch both the node app and python app each referencing the Sentry service to apply the ACLs.

  1. Follow these steps to run the Sentry service in self-hosted mode with mTLS enabled

  2. In a command prompt, set these environment variables:


    export DAPR_TRUST_ANCHORS=`cat $HOME/.dapr/certs/ca.crt`
    export DAPR_CERT_CHAIN=`cat $HOME/.dapr/certs/issuer.crt`
    export DAPR_CERT_KEY=`cat $HOME/.dapr/certs/issuer.key`
    export NAMESPACE=default
    

    $env:DAPR_TRUST_ANCHORS=$(Get-Content $env:USERPROFILE\.dapr\certs\ca.crt)
    $env:DAPR_CERT_CHAIN=$(Get-Content $env:USERPROFILE\.dapr\certs\issuer.crt)
    $env:DAPR_CERT_KEY=$(Get-Content $env:USERPROFILE\.dapr\certs\issuer.key)
    $env:NAMESPACE="default"
    
  3. Run daprd to launch a Dapr sidecar for the node.js app with mTLS enabled, referencing the local Sentry service:

    daprd --app-id nodeapp --dapr-grpc-port 50002 -dapr-http-port 3501 --log-level debug --app-port 3000 --enable-mtls --sentry-address localhost:50001 --config nodeappconfig.yaml
    
  4. Run the node app in a separate command prompt:

    node app.js
    
  5. In another command prompt, set these environment variables:


    export DAPR_TRUST_ANCHORS=`cat $HOME/.dapr/certs/ca.crt`
    export DAPR_CERT_CHAIN=`cat $HOME/.dapr/certs/issuer.crt`
    export DAPR_CERT_KEY=`cat $HOME/.dapr/certs/issuer.key`
    export NAMESPACE=default
    

    $env:DAPR_TRUST_ANCHORS=$(Get-Content $env:USERPROFILE\.dapr\certs\ca.crt)
    $env:DAPR_CERT_CHAIN=$(Get-Content $env:USERPROFILE\.dapr\certs\issuer.crt)
    $env:DAPR_CERT_KEY=$(Get-Content $env:USERPROFILE\.dapr\certs\issuer.key)
    $env:NAMESPACE="default"
    
  6. Run daprd to launch a Dapr sidecar for the python app with mTLS enabled, referencing the local Sentry service:

    daprd --app-id pythonapp   --dapr-grpc-port 50003 --metrics-port 9092 --log-level debug --enable-mtls --sentry-address localhost:50001 --config pythonappconfig.yaml
    
  7. Run the python app in a separate command prompt:

    python app.py
    
  8. You should see the calls to the node app fail in the python app command prompt based due to the deny operation action in the nodeappconfig file. Change this action to allow and re-run the apps and you should then see this call succeed.

Kubernetes mode

This example uses the hello kubernetes quickstart.

You can create and apply the above configuration files nodeappconfig.yaml and pythonappconfig.yaml as described in the configuration to the Kubernetes deployments.

For example, below is how the pythonapp is deployed to Kubernetes in the default namespace with this pythonappconfig configuration file. Do the same for the nodeapp deployment and then look at the logs for the pythonapp to see the calls fail due to the deny operation action set in the nodeappconfig file. Change this action to allow and re-deploy the apps and you should then see this call succeed.

apiVersion: apps/v1
kind: Deployment
metadata:
  name: pythonapp
  namespace: default
  labels:
    app: python
spec:
  replicas: 1
  selector:
    matchLabels:
      app: python
  template:
    metadata:
      labels:
        app: python
      annotations:
        dapr.io/enabled: "true"
        dapr.io/app-id: "pythonapp"
        dapr.io/config: "pythonappconfig"
    spec:
      containers:
      - name: python
        image: dapriosamples/hello-k8s-python:edge